IEEE AP-S/URSI 2023 || Portland, Oregon, USA || 23-28 July 2023

Institute of Electrical and Electronics Engineers (IEEE)

International Union of Radio Science

IEEE APS

U.S. NATIONAL COMMITTEE FOR URSI

National Academies Sciences Engineering Medicine

IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting

July 23–28, 2023 • Portland, Oregon, USA

23-28 July 2023 • Portland, Oregon, USA

IEEE AP-S/URSI 2023

23-28 July 2023 • Portland, Oregon, USA

WE-SP.1P.3

An Overview of Novel Antennas Manufactured via Charge-Programmed Multi-Material 3D Printing

Junbo Wang, Zhenpeng Xu, Zhen Wang, Ryan Hensleigh, Xiaoyu Zheng, Yahya Rahmat-Samii, University of California, Los Angeles, United States

Session:

Advanced Materials and Manufacturing for Future Antenna Applications

Track:

Special Sessions

Location:

Oregon Ballroom 201 (OCC)

Session Time:

Wed, 26 Jul, 13:20 - 17:00 PDT (UTC -8)

Presentation Time:

Wed, 26 Jul, 14:00 - 14:20 PDT (UTC -8)

Session Co-Chairs:

Sima Noghanian, CommScope Ruckus Networks and Ryan Banks, Virginia Tech

Session WE-SP.1P

WE-SP.1P.1: On the Prospects of Stereolithography Method for 3D Printing of Future Microwave Devices with Low-Dk

Dipankar Mitra, University of Wisconsin-La Crosse, United States; Ryan Striker, University of North Dakota, United States; Tasin Nusrat, Venkataramana Gadhamshetty, South Dakota Mines, United States; Benjamin Braaten, North Dakota State University, United States; Sayan Roy, South Dakota Mines, United States

WE-SP.1P.2: Method for Tackling the Variations in the Material Properties of 3D Printed Substrates for Microstrip Antennas

Zere Iman, Zubair Akhter, Atif Shamim, King Abdullah University of Science and Technology, Saudi Arabia

WE-SP.1P.3: An Overview of Novel Antennas Manufactured via Charge-Programmed Multi-Material 3D Printing

Junbo Wang, Zhenpeng Xu, Zhen Wang, Ryan Hensleigh, Xiaoyu Zheng, Yahya Rahmat-Samii, University of California, Los Angeles, United States

WE-SP.1P.4: Materials Design for Charge-Programmed Additive Manufacturing of Antennas

Zhen Wang, Zhenpeng Xu, University of California, Berkeley, United States; Junbo Wang, Ryan Hensleigh, Yahya Rahmat-Samii, University of California, Los Angeles, United States; Xiaoyu Zheng, University of California, Berkeley, United States

WE-SP.1P.5: Advancements in Additively Manufactured Radio Frequency Connectors

Reena Dahle, Metamagnetics Inc., United States; Sima Noghanian, CommScope Ruckus Networks, United States

WE-SP.1P.6: Performance of Printed Antennas on Stretchable and Non-stretchable Textiles

Adria Kajenski, Guinevere Strack, Alkim Akyurtlu, University of Massachusetts Lowell, United States

WE-SP.1P.7: Fully 3D Printed Antenna for C-V2X Communications

Adamantia Chletsou, Michigan State University, United States; Eric Newsom, Ford Motor Company, United States; John Papapolymerou, Michigan State University, United States

WE-SP.1P.8: A 3D Printed One-piece Wideband Beamforming Network and Antenna Array

Wenbo Liu, Bailey Campbell, Gregory Huff, The Pennsylvania State University, United States

WE-SP.1P.9: Dual-Band 3D Multiferroic Antenna Stack for Passive Telemetry Sensors

Veeru Jaiswal, Ghaleb Al-Duhni, Satheesh Bojja Venkatakrishnan, Florida International University, United States; Pawan Gaire, Shubhendu Bhardwaj, University of Nebraska-Lincoln, United States; Markondeya Raj Pulugurtha, John L Volakis, Florida International University, United States

WE-SP.1P.10: A J-band Fan-Beam 3-D Printed Reflector Antenna with Optimal Moment of Inertia for High Speed Scanning

Aditya Varma Muppala, Abdullah Alburadi, Kamal Sarabandi, University of Michigan, Ann Arbor, United States